High-lifter Max Clearance Series Trailing Arm Kit for Polaris Manual do Utilizador descarregar pdf

780 Professional Drive N Shreveport, LA 71105 Phone (318)524-2270

Polaris RZR 900 XP Arched Trailing Arms PSATA-RZR9

Read Before Installation

This product is designed for use on ATVs and/or RUVs to increase ground clearance. It is designed

for utility type, slow-speed use on relatively flat terrain in deep mud or snow. Although we have

many thousands of satisfied customers and over 1,800 franchised dealers selling and installing

accessories, purchasers should be aware that use of this product may increase the frequency of

required maintenance, part wear, and increasing risk of roll-over, injury and death on all types of

terrain. It is your responsibility to always inform other operators and passengers of this vehicle

about the added risks.

We recommend that wider tires and/or wheel spacers be used to achieve a wider stance and to

improve stability of the ATV and/or RUV. Riders should be advised that the handling

characteristics of a taller ATV and/or RUV are different and require extra care when riding,

particularly on side hills or off-camber situations. If you further raise the center of gravity by

adding taller tires, heavy loads to racks or seats, or by any other means, the ATV and/or RUV must

be operated with even more care, at slower speeds and on relatively flat ground. All turns should

be done at a slow speed, even on level ground.

Operation of an ATV and/or RUV with or without a lift kit, while or shortly after consuming

alcohol or drugs, subjects the rider to the risk of serious bodily harm or possible death. This risk is

compounded if the rider does not wear an approved helmet and other safety gear. High Lifter

urges that all approved safety gear be worn when riding an ATV and/or RUV as a driver or

passenger.

If this product is not what you expected, or is not consistent with your intended use, you should

return the product immediately to the seller, before installation, for a refund of the purchase price;

less any fees. After installation, product is warranted for 90 days for defects in workmanship and

materials. Warranty is limited to refund of the purchase price or replacement of the kit, at the

seller’s option.

Dealers and other Installers

You are responsible for informing your customer and end user of the information contained above

and the increased potential hazards of operating an ATV and/or RUV that has been modified from

its’ stock settings. If you install aftermarket accessories, it is your responsibility to also install the

warning label prominently in view of the driver and in prominent view of the driver and passenger

on RUVs and multi-passenger ATVs. They should also be instructed to notify anyone operating the

vehicle, as well as any passengers, that the ATV/RUV has been modified.

As discussed above, it is critically important that they be instructed in the need for slower speed

operation, regardless of terrain, after the product is installed.

1 2 3 4 5 6 7 8 9

Parts Diagram 2

Resumo do Conteúdo

Página 1

780 Professional Drive N Shreveport, LA 71105 Phone (318)524-2270 Polaris RZR 900 XP Arched Trailing Arms PSATA-RZR9 Read Before Installation This pr

Página 2 - Parts Diagram

Parts Diagram

Página 3

Installation Instructions 1. Before you jack up the UTV make sure to disconnect the rear sway bar from the arms. 2. Once you have disconnected

Página 4

5. Disconnect the knuckle/hub assembly and radius bars from the factory trailing arms. 6. Next, disconnect the arm from the shock at the shock

Página 5

9. Locate the arm for the side you are working on and install the new heim joint and jam nut. You will need measure the distance from the eye of the

Página 6

13. You must rotate the dust shield on the shock, so that it is on the back side of the shock. You will need to rotate the dust shield even if you de

Página 7

16. Connect the rear knuckle assembly and rear radius bars to the new trailing arm using the factory hardware. 17. Next attached the factory sway ba

Página 8

18. Connect the new sway bar extension bracket to the sway bar using the 10x50mm bolt and 10mm lock nut. 19. Connect the sway bar extension bracke

Página 9

22. Using the zip ties near the knuckle assembly, fasten the brake lines so that they do not get pinched or cut during operation. 23. Repeat the ste

Comentários a estes Manuais

Sem comentários

High-lifter Max Clearance Series Trailing Arm Kit for Polaris Manual do Utilizador

Consulte online ou descarregue Manual do Utilizador para Hardware High-lifter Max Clearance Series Trailing Arm Kit for Polaris . High Lifter Max Clearance Series Trailing Arm Kit for Polaris RZR XP 900 User Manual Manual do Utilizador

Resumo do Conteúdo

Comentários a estes Manuais

Manuais e produtos relacionados com Hardware High-lifter Max Clearance Series Trailing Arm Kit for Polaris